Radius-assigned framed-ip-address attribute – Panasonic NN46110-600 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
46
Chapter 2 Configuring servers
Table 1
RADIUS class attributes (continued)
Name
Value format
Function
Filter-ID
filter name
If defined, this filter name is applied to the
tunnel session.
DNS
domain server name
If used, the domain name system server
name.
NBNS
protocol name
NetBIOS protocol; an internet naming
service. If used, translates the NetBIOS
Windows domain name to the IP address.
Table 2 shows sample details that you enter into your RADIUS server.
Table 2
RADIUS example details
User ID
Class attribute value
Assigned group
Lee Madison
ou=New Products,
ou=Research and Development
New Products
Julie Lane
None
Default
Bill Sullivan
ou=Staff
Default (ou=Staff does not
exist)
The RADIUS server uses the class attribute value to associate the user ID with a
group in the LDAP database.
RADIUS-Assigned Framed-IP-Address attribute
You configure a RADIUS-Assigned Framed-IP-Address attribute on the RADIUS
server for the UID being authenticated by the VPN Router. If you enable Allow
Static Addresses (Profiles > Groups > Edit > Connectivity window) for the
assigned group, then the tunnel session uses the returned IP address. Otherwise, it
assigns an IP pool address.
Note: The RADIUS server returns only a single IP address; therefore,
only one active tunnel connection is permitted per UID.
NN46110-600