Panasonic NN46110-600 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
58 Chapter 2 Configuring servers
4
Click
Add
in the
Standard Options
section to access the
Add Option
window. The standard options section shows the current status of any added
options and lets you add new options:
•
Select the desired options from the list.
•
Select the desired Type from the list.
•
Enter the appropriate value.
5
In the
Pool
section, click
Add
to add a pool.
6
In the Add Pool window:
a
Enter the base IP address for the pool.
b
Enter the subnet mask for the pool.
c
Enter a pool name. The pool name must match the group profile for
DHCP.
d
Enter a description of the pool.
e
Click
OK
.
7
Select
Pool
and click
Configure
to return to the
Pool
window.
8
Use the
Inclusion Range
section to add blocks of IP addresses that you can
then give out. Under
Inclusion Range
, click
Add
.
9
In the
Pool Inclusion
window:
a
Enter the base IP address for the
Start Address
.
b
Enter the End IP address.
c
Click
OK
.
10
Optionally, you can select an Exclusion Range for further control of the IP
addresses that you give out. Under
Exclusion Range
, click
Add
.
11
On the
Pool Exclusion
window:
a
Enter the Start Address for the range.
b
Enter the End Address for the range.
c
Click
OK
.
12
Optionally, you can force the DHCP server to assign a fixed IP address to a
host every time it logs in. You can do this with host reservations under the
Host
section. Click
Add
.
NN46110-600