Panasonic SC-CH11 - Manual (Page 26)

CdMfACT OIK PL.LVIII
o o
i
r □ t
o o ©
->czz::='
■ Changing the program
(Also available from the remote control.)
Press CANCEL (front panel or remote control) in
the stop mode.
CANCEL -CANCEL
O/o
Each time you press the cancel button, you will cancel the last track
in the programmed sequence.
Example:
When you have programmed tracks 3, 5 and 7, the tracks will be
canceled in the sequence of 7, 5 and 3.
Note:
It is not possible to clear only the tracks located in the middle
program (such as the third of five tracks).
■ To add the entry
You can add the entry in the stop mode.
From the main unit
In the stop mode, turn the jog dial to select the desired track and
then press SET.
From the remote control
In the stop mode, press the desired numeric button.
PROGRAM
CD CANCEL
o
■ To confirm the program
(Also available from the remote control.)
While in stop mode, press the sklp/search button.
o o
Each time you press the skip/search button, the display shows the
next track in the program sequence.
■ To cancel program play
1. Press PROGRAM on the remote control in the stop mode.
The program indicator will flash for several seconds.
2. Press CANCEL while the program indicator is flashing.
The program indicator goes out and the program is cleared.
Note;
When you press OPEN/CLOSE to open the disc tray, the program
play is cancelled.
27