To stop playback, Press the stop button, Full auto-stop – Panasonic SC-CH11 User Manual
Page 31: About the dolby noise reduction system, Listening to tapes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
Listening to Tapes
(continued)
■ To stop playback
(Also available from the remote control.)
Press the stop button.
■ Full auto-stop
When the tape reaches the end, the tape transport will automati
cally stop. However, if you have set the reverse mode select button
to CZ!D in the playback mode, the auto-stop function will not
operate.
■ About the Dolby Noise Reduction system
Using Dolby NR reduces tape hiss in the high-frequency range. It
boosts the level of the high-frequency program content during re
cording, and lowers it by the same amount during playback, simul
taneously reducing high-frequency noise incurred during the
recording process.
This system has the Dolby 8-type of noise-reduction system. With
Dolby B, noise is reduced to about one-third. If you are playing a
tape that was recorded with Dolby NR, use the Dolby NR mode
during playback.
Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation.
“DOLBY" and the double-D symbol GO are trademarks of
Dolby Laboratories Licensing Corporation.
X