Panasonic SC-CH11 - Manual (Page 50)

Technical Specifications
■ Amplifier section
1 kHz continuous power output
both channels driven
Total harmonic distortion
half power at 1 kHz
Frequency response
AUX
Input sensitivity
AUX
Input impedance
AUX 24 kO
Graphic equalizer ± 10 dB
(100 Hz, 330 Hz, 1 kHz, 3.3 kHz, 10 kHz)
2x20W(THD1%,6Q)
0.07% (60)
30 Hz-30 kHz(-3dB)
250 mV
■ FM tuner section
Frequency range
Sensitivity
Total harmonic distortion
MONO
STEREO
S/N
MONO
Frequency response
Image rejection at 98 MHz
Stereo separation at 1 kHz
Antenna terminals
■ LW/MW tuner section
Frequency range
MW
LW
Sensitivity
MW (at 999 kHz)
LW(at 252 kHz)
■ Cassette deck section
Track system
Heads
Playback
Record/Playback
Erasure
Motor
Recording system
Erase system
Tape speed
Frequency response
NORMAL
CrOa
S/N (CrOi-type tape)
Dolby NR off
Dolby NR on
Wow and Flutter
Fast forward and rewind time
Approx, 110
M CD player section
Sampling frequency
Decoding
Beam Source/wave length
Number of channels
Frequency response
S/N Ratio
Wow and Flutter
Digital filter
D/A converter
87.50-108.00 MHz
23.3 dBf (4.0 pV, IHF' 58)
0.3%
0.5%
70 dB
30 Hz-15 kHz (+0.5 dB, -2dB)
40 dB
35 dB
75Q (unbalanced)
522-1611 kHz
144-288 kHz
250 pV/m
350 pV/m
4-track, 2-channel
Solid permalloy
Solid permalloy
Double gap ferrite head
DC servo motor
AC bias, 100 kHz
AC erase, 100 kHz
4.8cm/sec.
40 Hz-14 kHz (-1-3, -6dB)
40 Hz-15 kHz (-H3, -6dB)
52 dB (A-WTD)
61 dB (CCIR)
0.1% (WRMS)
seconds with C-60 cassette tape
44.1 kHz
16-bit linear
Semiconductor laser/780 nm
2-channel, stereo
20 Hz-20 kHz (-M, -2dB)
90 dB Filter (JIS. A)
Below measurable limit
4 times over sampling
'Multi-stage noise shaping
■ Speaker system
Type
Speakerfs)
Impedance
Input power
For areas except United Kingdom
Output sound pressure level
Cross over frequency
Frequency range
Dimensions (Wx H x D)
Weight
■ General
Power consumption
Power supply
Dimensions (WxHxD)
Weight
2 way, 2 speakers bass-reflex
14 cm cone type
6 cm cone type
60
50 W (music)
150 W (PEAK INPUT)
88 dB/W (1.0 m)
2.8 kHz
50 Hz-22 kHz(-16dB)
180x319x251 mm
3.3 kg
95 W
~50 Hz, 230-240 V
215x319x338 mm
6.9 kg
Notes:
1. Specifications are subject to change without notice.
Weight and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum
analyzer.
This apparatus was produced to BS 600.
59