Panasonic NV-SD230A - Manual (Page 12)

storing TV Broadcasts in your VCR
The VCR is fitted with its own tuner (just like a norma! TV) and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels
The local TV Broadcast channels 2,7, 9,10 and 28 are factory-preset In this VCR.
That is, if ypu can receive television broadcasts on VHF channels 2, 7, 9, 10 and UHF channel 28, these are already tuned
on the programme positions with the matching numbers. However, it is possible to cancel these settings and tune the local
TV broadcast channels to any desired programme position.
For alternative settings and tuning of additional TV broadcast channels, follow the Tuning Operations.
Auto Tuning Using the On Screen Display
Preparations
• Confirm that the TV is on and the VCR viewing channel is selected.
• Turn on the VCR and select any programme position except AV.
Set the VCR/TV switch to VCR for
using the numeric buttons.
POWER
VCR~..-'TV HPUTSELECI
V 0 (?)i 0
/\
V
+
S6WCH- ose
.am
MSSIA'I' ^____ _
Q . . Q .
HEKT ■ I-IND
6
X-
1
: HEC
Operations On Screen Display
1
»^LAttOUAGE
CLOCKSST TUNen pfi£seT
CH ADDaOELETE
OPTION
Press MENU.
Notes:
• Auto Tuning searches for TV stations
from VHF minimum to UHF maximum
and memorizes every tuned programme
position. Other programme positions are
skipped.
• Auto Tuning takes seven or more
minutes to complete its search.
® If the VCR is not correctly tuned by Auto
Tuning, follow the procedure on the next
page.
CE),
ts
CE
. t G№RPRÉ5
(ENTER
CH ADDaOELETE
OPTION
Select TUNER
PRESET.
c a t . « « ■ a a o o o O i i B - j . - j
CD
CD
/77-. ■ ... - V
»AUTO TUNE
(OFF)
(3)
FINE
I--.»
AUTO TUNING
IN PROGRESS,
PLEASE WAIT.
Select AUTO TUNE
and press ◄ or ►.
•When Auto Tuning is
completed, the on screen
display disappears and
programme position 1 is
selected.
The number displayed here is
tthe number of channels still
to be auto tuned.
Channels that can be Received
VHF CATV UHF
0-12 45-470MHZ 28-69
J2