Infra-red remote controller, Vcr operation – Panasonic NV-SD230A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Infra-red Remote Controller
The remote control unit for this VCR is a universal remote
controller. As such, some of its buttons are not used to
operate this VCR.
VCR OPERATION
Set
VCR/TV switch to VCR for using the
2 Numeric Buttons
Selects programme positions (1-99) of the VCR.
• Ensure that
VCR/TV switch is set to VCR.
9: ©
19: © —O —®
3 OSD
For the On Screen Display Function.
4 RESET
Resets the tape counter (elapsed time) to “0:00.00”.
•The tape counter is automatically reset to “0:00.00”
when a video cassette is inserted.
5 il/l►(PAUSE/SLOW)
During playback;
•By pressing:
Still picture. “
[|0 " is lit.
• By pressing for 2 seconds or more:
Slow playback. “ 0>” is lit.
During recording:
Interrupts recording.
6 On Screen Display Menu Operation Buttons
MENU:
Makes the on screen display main menu appear on the
TV screen.
ENTER:
Confirms the selection, or stores.
A ▼ ^
Makes selections from the on screen display.
•These buttons can also be used for playback, stop,
rewind and fast forward mode.
7 Timer Recording Operation Buttons
CH, DATE, ON, OFF:
Programmes a timer recording.
PROG./CHECK:
Sets and checks timer programmes.
CANCEL:
Cancels the settings made for timer recording.
SPEED:
Selects the desired tape speed for recording.
SP gives the best picture quality.
LP (EP) gives the longest recording time.
•The indicator (SP, LP or EP) corresponding to the
selected tape speed now appears on the VCR display
or on screen display.
LP: This appears when PAL/MESECAM signals are
input or output.
EP; This appears when NTSC signals are input or
output.
TIMER REC 0:
Turns the timer recording function on and off.
□ is lit or not lit.
Once you operate the timer recording function, normal
VCR operation is not possible unless you press this
button again and release the VCR from the timer
recording standby mode.
8 No function.
This button is not used to operate this VCR.
9 No function.
This button is not used to operate this VCR.
10 VCR/TV switch
VCR:
Selects the VCR operation mode.
TV:
Selects the TV operation mode.