Panasonic NV-SD230A - Manual (Page 5)

7 Infra-red Remote Control Receiver Window
8 CVC (Crystal View Control) Indicator
This indicator is lit when the VCR is on.
9 Display
10
Selects the required programme position (TV station) of
the VCR.
For tracking adjustment and vertical locking adjustment.
•For manual tracking adjustment
The N/ and buttons are used to adjust the tracking
when, for example, noise bars on the picture during
normal playback are better removed manually than by
automatic digital tracking control. To return to automatic
digital tracking control, press both buttons together.
•For slow tracking adjustment
When noise bars appear during still or slow playback,
switch over to slow playback and adjust with the V or
^ button to reduce the noise bars.
•For vertical locking adjustment
Use the v' and /s buttons to minimize any vertical
jitter during still picture playback.
Set VCR/TV switch to VCR for using the V and /\
buttons of remote controller.
REAR
15 VIDEO IN
Connects a video cable from a movie camera or another CQ
unit.
16 VIDEO OUT
Connects a video cable to a TV or another unit.
17 RFIN
Connects the external aerial.
18 AC IN-
Connects the main power supply.
19 AUDIO IN
Connects an audio cable from a movie camera or
another unit.
20 AUDIO OUT
Connects an audio cable to a TV or another unit.
21 RFOUT
Connects the aerial terminal on a TV.
11 •REC/OTR
Starts recording.
For One-Touch Recording (OTR).
12 TIMER REC0
Turns the timer recording function on and off.
H is lit or not lit.
Once you operate the timer recording function, normal
VCR operation is not possible unless you press this
button again and release the VCR from the timer
recording standby mode.
13 STOP ■ P)
Stops playback or recording.
Ejects the video cassette.
14 PLAY/OFF E ►
Starts playback. is lit.
For the repeat playback function.
For the Play-Off Timer function.