Panasonic NV-HD675 - Manual (Page 12)

■ ■
storing TV Broadcasts in your VCR
The VCR is fitted with its own tuner (just like a normal TV)
and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV
Channels
(NV-HD675A only)
The local TV broadcast channels 2, 7 , 9 , 1 0 and 28
are factory-preset In this VCR.
That is, if you can receive television broadcasts on VHP
channels 2, 7, 9 , 1 0 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings
and tune the local TV broadcast channels to any desired
programme position.
For alternative settings and tuning of additional TV
broadcast channels, follow the Tuning Operations.
Plug in Auto Tuning
(NV-HD675EAonly)
When the VCR is turned on after connecting the aerial cable
and the mains lead, Auto Tuning starts.
On Screen Display
AUTO TUNING
m PROGRESS,
PLEASE WAIT.
Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position.
• If you turn the VCR off during Auto Tuning, Auto Tuning
will stop halfway.
• If the VCR starts playback during Auto Tuning, Auto
Tuning will stop halfway.
To Cancel Auto Tuning Mid-Operation:
Press MENU during Auto Tuning. Auto Tuning is cancelled.
To restart Plug in Auto Tuning:
If Auto Tuning is cancelled by pressing MENU:
Press ^ EJECT and remove the video cassette.
Keep the
n / and /\ buttons on the VCR pressed
simultaneously for 3 seconds or more during the VCR
on.
•The channel displayed on the VCR display disappears
for a moment then changes to 1.
Display Symbol
Disappears -* 1
Disconnect the mains lead and then reconnect it.
Turn off the VCR and then turn it on.
• Auto Tuning commences.
if Auto Tuning stops halfway by turning the VCR off,
playback or a power failure:
1 Disconnect the mains lead and then reconnect it.
2 Turn off the VCR and then turn it on.
• Auto Tuning commences.
©: ®
SEARCH: ÓSD -. DISPLAY - a-coK :
REsn ■: ■ rlfJOEX-^ PIC ■ ■
O
Q
n