Panasonic NV-HD675 - Manual (Page 24)

To Play a NTSC Game on PAL System TV
Follow steps 1 to 2 of TAPE SELECT.
3 Select NTSC CONVERTER.
CE)
CX)
4iÌ№'SÌLEèT “ ÉÌB&f"
NTSC INPUT SELECT (ÀUTO
NTSC PB SELECT (onPALTV;
NTSC CONVÈHTEB
JETBÉWIND
POWER SAVE
AUDtO MIX
(OFI
(ONI
(OFF)
(O f H
4 Select ON or OFF.
™ 'ÀUT'''
AL
I
NTSC INPUT SELECT ^UTO)
NTSC PB SELECT (onpALTV)
NTSC CONVERTER (ON}
JET REWIND I on )
POWER SAVE (OFF)
AUDIO MIX (OFF)
OFF:
ON: Normally set at this position,
PAL TV can receive signais from NTSC 3,58
signal source {e.g., NTSC game machines.)
connected to the VCFi main unit. However,
when recording, this function does not work.
• When receiving NTSC 4.43 signals, this function does
not work correctly.
Press MENU twice to make the on screen display
disappear.
C men J
To Change the Rewinding Speed
This function enables the tape to rewind at the 360 times
speed.
Follow steps 1 to 2 of TAPE SELECT.
3 Select JET REWIND.
CX)
CD
4 Select ON or OFF.
NTSC INPUT SELECT (AUTO)
NTSC PB SEi^CT
(onPALTV)
NTSC CONVERTER (OFF)
JET REWIND (OFF
POWER SAVE (OFF
AUDIO MIX (OFF)
® Select OFF if you wish to rewind the VCR slowly.
For Minimised the VCR’s Power
Comsumption When the VCR is Switched
Off
Follow steps 1 to 2 of TAPE SELECT.
3 Select POWER SAVE. rr
CD
CD
. .>v. I j'.ii ".',1
-------- "{Eiior-
NTSCINPUT SELECT (AUTO
NTSC PB SELECT (onPALTy
NTSC CONVERTER (OFF)
JET REWIND (0№
POWER SAVE (OFR
AUDIO MIX (OFF)
4 Select ON or OFF.
ON;
OFF:
This setting makes the display disappear when
the VCR is off.
It will not operate in the Timer standby mode.
After recording all programmed data, the VCR will
go into Power save mode.
This setting does not conserve power when the
VCR is off.
Press MENU twice to make the on screen display
disappear.
dSlh
5 Press MENU twice to make the on screen display
disappear.
(MENU
24