Controls and connection sockets, Front, 1 power (!)/l (power c!)) – Panasonic NV-HD675 User Manual
Page 4: 2 ^ eject, 3 cassette compartment, 4 stop ■ (□), 5 pause/stillii, 6 play/off
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Controls and Connection Sockets
This section describes in detail the function of each button, switch and connection socket.
1
2
3
4 5
Set VCR—TV switch to VCR for using
POWER c!) and the V and buttons.
FRONT
1 POWER (!)/l (POWER C!))
Press to switch the VCR from on to standby mode or
vice versa. In standby mode, the VCR is still connected
to the mains.
Set VCR—TV switch to VCR for using POWER (!) of
remote controller.
2 ^ EJECT
Ejects a video cassette.
3 Cassette Compartment
insert a video cassette here.
4 STOP ■ (□)
Stops playback or recording.
Ejects the video cassette.
5 PAUSE/STILLII
In the stop mode: Still picture (Jog/Shuttle mode).
During playback:
•By pressing:
Still picture. “ OD ” ‘s (Jog/Shuttle
mode).
•By pressing for 2 seconds or more:
Slow playback, “ D>” is lit.
During recording: Interrupts recording.
6 PLAY/OFF □ ►
Starts playback. “I>” is lit.
For the Play-Off Timer function.