Panasonic NV-HD675 - Manual (Page 40)

other Functions
Child Lock Function
This function deactivates all buttons on the VCR and the
remote control by holding down ENTER and OFF (-F)
simultaneously until the "> <3 hold” indication appears in the
VCR display.
Display Symbol
NTSC Playback
• If you press a button while the Child Lock function is
on, the "t>< hold” indication appears in the VCR display
to inform you that no operation is possible.
To cancel the Child Lock function
Hold down ENTER and OFF (+) simultaneously until the
“ l><] hold” indication disappears in the VCR display.
© ©
SEARCH . OSD . OISaAr G.CQDE
: :FESFrJ. .-REC; ;
^ ® g
dm : TTOPf'i
____ CWCfc-. SAEE&I ._____
1 1 ( t ( ■ 1 t SI 1
■ .••■ TOVTV-.
mm.
S-VHS Quasi Piayback
(SQPB)
It is also possible to playback tapes recorded In the S-VHS
system.
• Some picture noise may occur depending on the type of
tape used.
• It is not possible to fully obtain the high resolution that S-
VHS is capable of.
• It is not possible to record in the S-VHS system with this
VCR.
Tapes recorded in the NTSC system can be played back
with this VCR via a PAL system TV.
• Select NTSC PB SELECT from the on screen display
according to the colour TV system of the TV. (See page
23.)
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
Note:
On some TVs, the playback picture may roll up or down;
adjust this using the V-HOLD control on the TV. TVs not
equipped with a V-HOLD control cannot correct this
condition. The playback picture may shrink vertically, and
black bars may appear both on the top and bottom of the
screen. This does not indicate a malfunction.
• During cue, review, still or slow playback, the picture may
not be in colour. Alternatively, the top of the TV screen
may be distorted.
Note for only NTSC Playback on PAL system TV
This function is designed to allow only the playback of tapes
recorded by NTSC signals on a PAL system TV. The NTSC
signal Is not completely converted to a PAL signal. For this
reason, images played back by this function cannot be
recorded correctly on other VCRs.
Other Automatic Functions
Automatic Playback
When a video cassette without an erasure prevention tab is
inserted, the VCR starts playback automatically.
VCR-Off Playback
When the VCR is off, an inserted video cassette can be
played back by pressing PLAY/OFF □ ►.
Automatic Revifinding
When the tape reaches its end during recording (except for
timer recording) or piayback, it will automatically be rewound
to the beginning.
During OTR, this function will not work.
Automatic Switching Off and Ejection
When the VCR is switched off, an inserted video cassette
can be ejected by simply pressing A EJECT. The VCR will
eject the video cassette and automatically turn itself off
again.
40