Installation continued, Installation, Continued installation procedures – Panasonic CQ-FX85LEN User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
continued
Installation Procedures
1. Secure the Mounting Collar 0.
Insert Mounting Collar 0 into the car’s dashboard, and bend mounting tabs out with a screwdriver.
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt
0
),
using a suitable wrench.
c) Insert the unit into Mounting Collar © and push it in until “click” is heard.
Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap
(D
Affix one end of the Rear Support Strap © to the rear of the unit, and the other end to the Fire Wall
of Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
{If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt © on the rear of the unit with Rubber Cushion (Optional), and mount it into
the existing Rear Support Bracket.
(D Plain Washer
Fire Wail of Car
Rear Support Bracket
{existing on the car)
38
CQ-FX85LEN