Electrical connection, Loudspeakers (connector b) – Panasonic CQ-FX85LEN User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Electrical Connection

Caution:

• Confirm the note on page 4, and make connections to the connectors on car side.

• To prevent damage to the unit, be sure to follow the connection diagram below.
• Remove the covering of the leads about 5 mm long from their end before connecting, {the cords except for ISO

connector’s cords)

• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis, Bundle all cables and

keep cable terminals free from touching any metal parts.

CX-DPe01EN

Extension Cord (DIN/BATT/RCA)

=ашЕ1ЁВ —

• This unit can be connected to an

optional CD changer {CX-DP600

EN/AEN or CX-DP1200EN).
For details consult your nearest

authorized Panasonic Dealer,

• For connection to a CD changer,

refer to the operating instructions
of the CD changer (CX-DP600
EN/AEN or CX-OP1200EN).

Loudspeakers (connector B)

Left-i-

Left-

Right -

1

-

Right -

Front

B5 (White)

B6 (White w/Black

Stripe)

B3 (Gray)

B4 (Gray w/Biack

Stripe)

Rear

B7 (Green)

B8 (Green w/B!ack

Stripe)

B1 (Violet)

B2 (Violet w/Black

Stripe)

A4

A8

BATTERY LEAD (To Battery of Car) (Yellow)
Connect to the “BAT’ terminal on the fuse block of the car.

The power should be supplied continuously to the yellow
leads regardless of the on/off position of the ignition key.

GROUND LEAD (Black)
Connect to a well grounded metallic part of your car.

C1

A5

MOTOR ANTENNA RELAY CONTROL LEAD (Dark Blue)

(To Motor Antenna) (Max. 500mA)

This lead is not intended for use with switch actuated power

antenna,
AMP-RELAY CONTROL POWER LEAD
This lead is for connection to Panasonic power amplifier.

AT_______________________________________

f POWER LEAD (Red)

^

"

Connect to the "radio" power line of the car or to the “IGN"
or "ACC" terminal of the fuse block.

Horn Alert CONTROL LEAD (Brown)
(To Horn Alert UNIT) (CA-HAL1EN)

C2

TELEPHONE MUTE LEAD (Orange)

(To car telephone mute line)

TELEPHONE MUTE
The telephone mute lead, if connected to the car telephone

mute line, will activate the muting circuit and the sound from
the speakers cannot be heard while the telephone conver­
sation is in progress.
Note: This telephone mute lead is for connection only to the

radio mute line. Be sure to ascertain this because it will not

work with other type of output system.

___

40

CQ-FX85LEN

Advertising