Panasonic CQ-FX85LEN - Manual (Page 35)

Fuse
Be sure to use a fuse of the specified rating (15A) when replacing a blown fuse. Fuses with higher capacity
ratings, use of any substitute, or connection without a fuse may result in a fire hazard or damage to the unit. If
the replacement fuse fails, consult your nearest authorized Panasonic Service Center.
Maintenance
To clean the exterior of this unit, use a soft cloth to wipe the surface.Do not use benzine, thinner, or any other
type of solvents.
Specifications
Genera!
Power Supply
Tone Controls
Current Consumption
Maximum Power Output
Power Output
Speaker Impedance
Dimensions {Main unit)
Weight (Main unit)
DC 12V (11V - 16V), Test Voltage 14.4V, Negative Ground
Bass; ±12dB at 100Hz
Treble; ± 12dB at 10kHz
Less than 2.5A (Tape mode, 0.5W 4-Speaker)
50W X 4 (at 4ii)
24W X 4 (DIN45 324, at 4^)
4-sa
178(W)x 50(H) X 150(D) mm
1.6 kg
FM Stereo Radio
Frequency Range 87.5- 108MHz
Usable Sensitivity 6dB/pVj[S/N 30dB)
Stereo Separation 35 dB(kt1kHz)
MW Radio
Frequency Range 531 - 1,602kHz
Usable Sensitivity 28dB/pV (S/N 20dB)
LW Radio
Frequency Range 153-279kHz
Usable Sensitivity 32dB/pV (S/N 20dB)
Cassette Piayer
Reproduction System 4-track, 2-program stereo
Tape Speed 4.76cm/sec.
FF/REW Time Less than 110 sec. (C-60)
Frequency Response 30 - 17,000Hz (Norma!)
30 - 18,000Hz (Metal)
Wow and Flutter 0.12% (WRMS)
Signal to Noise Ratio 52dB (Dolby B NR on; 62dB, Dolby C NR on; 72dB)
Note:
Specifications and the design are subject to possible modification without notice due to improvements.
Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer® and the circle-in-square device are trademarks owned by Desper Products, Inc.
42
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol □□ are trademarks of Dolby Laboratories Licensing Corporation.
CQ-FX85LEN