Panasonic OMNIVISION PV-8661 - Manual (Page 27)

With the proper audio mode setting, your VCR can:
1) record and playback an MTS stereo broadcast {main language) in stereo Hi-Fi.
2) record and playback a monaural broadcast (main language) or Secondary Audio Program (sub language)
on the Hi-Fi tracks for better quality monaural sound.
3) playback non Hi-Fi tapes in monaural.
• When recording, the selected broadcast sound is always recorded on the left and right Hi-Fi tracks as well as
the normal monaural track. This means your tapes can be played back on Hi-Fi as well as non-Hi-Fi VCRs.
Audio Mode for Recording
1
Press SAP/HI-Fi repeatedly
(each press within 5 seconds)
to select the desired audio mode
(STEREO. SAP, or MONO).
• Please refer to the “Receivable
Broadcast Types" section on page 26,
1
b
O © ©
© © ©
© © ©
© ©"i'
- TCTJgJCI WMJI »PC«
o CZD^O
-Q
OQi
VOl № 4
GD Qi
The arrow indicates
your selection.
2
Do a recording.
See the “Record On a Tape” section on page 17.
Audio Mode for Playback
a Playback the tape.
See the “Playback a Tape" section on page 16.
b Press SAP/Hi-Fi repeatedly
(each press within 5 seconds)
to select the desired audio
mode (HIFI or NORMAL).
Select “HIFI" to listen to your stereo
recordings with stereo sound, or
“NORMAL" for monaural sound.
HIFI
NORMAL
The arrow indicates
your selection.
When purchasing or renting prerecorded tapes, remember that only those recorded in Hi-Fi stereo wilt
play back with true stereo sound. Standard stereo t^es will play back with monaural sound.
In order to listen to Hi-R stereo playback, the VCR AUDIO (L/R) jacks must be connected to a istereo
TV or an external stereo amp and speakers. {See page 26.)
When adjusting the tracking during playback, the Hi-Fi audio sound may revert to normal audio sound.
This is normal.
There may be a difference in audio level between Hi-Fi and normal audio playback.
27