N-* vcrplus+^prograim, Easy taping – Panasonic OMNIVISION PV-8661 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^^N-* VCRPlus+^Prograim
Easy Taping.
1
[^icheck list before you begin.
□ The clock is set.
n VCR Plus+ Setup is complete
{see pages 28-30).
3
#
5
0
©
©
-0
0
©
O © ©
© ©I
COtlTEAnciCT •^OEt
a
iO
a
a Qi
o a*
J
■ADD/
DELETE
Use normal Timer Recording steps if:
• the PlusCode for a program is not listed.
• you anticipate the program, such as a sporting
event, to run over the scheduled stop time.
See page 19 to:
• cancel a timer recording in progress.
• replace program contents.
• review or clear program contents once set.
Important notes when using a DSS receiver
• When recording programs via a DSS receiver,
the DSS receiver must be left on.
• When recording programs via an antenna or
cable, the DSS receiver must be turned off.
Press PROG
to display the
“SET PROGRAM” screen.
2
Press
AW
to select “VCR Plus+
PROGRAM,"
and then press ►
to display the “VCR Plus+" screen.
............SET PROGRAM------------------
VCR Plus. PRORRAP,1
riMER PROGRAM
VCR Ptus+
ENTER PLUSCODE NUMBER
/ I \
USING 0-9 KEYS
END :PROG KEY
O Press the NUMBERED keys
to
enter the PlusCode number.
• Refer to your local TV listings.
To Make Corrections
Press repeatedly to delete the
PlusCode number. Then, enter the correct number.
VCR Ptus+
ENTER PLUSCOOE NUMBER
123456
USING 0-9 KEYS
BACKSPACE:4 KEY
ENTER :PR0G KEY
Press PROG
to lock in your program.
O
Press the 1, 2 or 3 key
to select
the program type.
6
Press
AW
and
►
to select and
set each of the remaining items
as follows.
Remaining Items
• Category (N/A [not applicable], SPORTS,
MOVIE. COMEDY, MUSIC, DRAMA)
• Speed (SP. LP, SLP)
To Make Corrections
Repeatedly press ► to move the cursor
to the right, or A to move to the left to the
incorrect entry and make the correction.
7
Press PROG
if contents are
acceptable.
To cancel program contents:
Press ADD/DELETE.
1 ONE TIME
2 DAIUY(MON-FRI)
3 WEEKLY
If you use connection type
"A” on page 28, the
channel shown in this on
screen display will always
be the cable box output
channel number.
P DT START STOP CH SPD
1DAY 9;OOA12:OOA OB SP
CANCEL;ADD/DLT KEY
SELECT 1-B:A ▼ KEY
ENTER :► KEY
END iPROG KEY
8
Press PROG
to complete
the program.
• If you're using a Cable Box, make sure
that it is tuned to the desired channel
and the power is left on for timer recording.
TURN VCR OFF
FOR TIMER RECORDING
AND
LEAVE CABLE BOX POWER ON
This display may differ depending
on your cable box hook-up.
Press POWER
off to set the timer.
~ E?I^13S) -
Multi Function Display
• You can obtain unlisted PlusCode numbers by calling 1 - 900 - 454 - 7587. Call costs approximately $.95
per minute.
• VCR PtusCodes can not be used to program the VCR to record DSS channels.
• Avoid overlapping program times.
• An on-screen display will indicate if an invalid PlusCode number has been entered or when all timer
programs are full.
31