Basic connection – Panasonic OMNIVISION PV-8661 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Basic Connection
or
Cable TV
or
1
Disconnect the antenna or
cable from your TV and connect
it to the VCR {IN FROM ANT.
/
3
Set the Output Channel of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
{VCR-TV Connection Cable) (supplied)
2
Connect the VCR to your TV with
the RF Coaxial Cable (OUT TO TV).
r WARNING-----------------------------------------------------------------------------------------------------------------------------
When using “Nut type" RF coaxial cables, tighten with fingers only. Overtightening may damage terminals.
Advertising