Panasonic RX-E300 - Manual (Page 25)

ii№:F'^"^
VOLUME Press VOLUME - or VOLUME
+ to set the volume to be
heard during play.
The volume level during timer operation
is now set.
8 TIMER Press TIMER.
Timer play display lights.
9
Press POWER to turn the unit
off.
f-
TIMER
n “i I tn
L C- "tu
This flashes at the programmed time.
- TiMeR -
r Tt ' ■ r
U M I
nn t
u-u I
TIMER To release the timer function;
Press TIMER and clear the timer play
display.
The OFF display now appears.
The timer does not operate but the time
setting is stored in the memory.
To check what has been programmed (only when unit is OFF):
(Available only the unit is operated on AC power)
Press TIME CHECK.
The display shows the following information each time the button is
pressed,
1. Programmed time
2. Programmed source
3. Present time (Original display)
To enjoy play after programming (after step 8):
1. Start playing the desired sound source.
2. After play turn the unit off.
Even if you change the volume level or sound source, whatever was
programmed is restored at the wake-up time.
Using the timer at the same time every day:
First check that TIMER appears on the display and then turn the unit
off. Follow the steps 6 to 9 to change the source and volume for the
timer function.
To stop the timer in mid-operation:
Turn the unit off.
Esa
The timer will not operate if the unit is on.
To use the sleep timer in conjunction
with the wake-up timer
For example, falling asleep while listening to an FM program and
waking up the next morning listening to a CD:
See page 28 for the sleep timer operation.
1. Set the timer for playback to listen to the CD
(steps 1 to 8 on pages 24 and 25).
2. Listen to the radio.
3. Press SLEEP.
You cannot make a different CD program setting for the timer play­
back and sleep timer.
For your reference:
Even if the volume is changed for the sleep timer, the sound will be
heard while the timer play is operating at the volume which was
adjusted when setting the timer play.
25