Panasonic RX-E300 - Manual (Page 27)

TIMER
8 C
POWER )
Press TIMER, and press it
again while “TIMER" is dis­
played.
Timer recording display lights.
Press POWER to turn the unit
off.
■”/ 7i*n n
i_ i_-UU
Using the Recording Timer
To use the sleep timer in conjunction
with the recording timer
For example, falling asleep white iistening to a CD and subsequently
recording a late-night program on FM:
See page 28 for the sleep timer operation.
1. Set the timer for recording (steps 1 to 7 on
pages 26 and 27).
2. Play the CD.
3. Press SLEEP.
(Set the sleep timer so that the unit is turned off before the start of
the timer recording.)
This flashes at the programmed time.
- TIMER-HEC-
c t\/t
t I
nn in
UU. lU
TIMER To release the timer function:
Press TIMER and clear the timer record­
ing display.
The OFF display now appears.
The timer does not operate but the time
setting is stored in the memory.
To check what has been programmed:
(only when unit is OFF)
(Available only the unit is operated on AC power)
Press TIME CHECK.
The display shows the following information each time the button is
pressed.
1. Programmed time
2. Programmed station
3. Present time (Original display)
To enjoy play after programming (after step 7):
1. Start playing the desired sound source.
2. After play turn the unit off.
Even if you change the volume level or sound source, whatever was
programmed is restored at the time set for recording.
•The timer will not operate if the unit is on.
•The recording timer is released after the programmed recording
has performed.
27