Connecting the speaker system, Attaching the speakers, Detaching the speakers – Panasonic RX-E300 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the Speaker System
This unit can be used as a one*piece portable stereo system or a
three-piece component system, by attaching or detaching the
speaker system.
Before attaching or detaching the speakers, be sure to disconnect
the speaker cables from the speaker terminals.
Be sure to press POWER to turn the unit off before connecting or
disconnecting the speaker cables.
Attaching the speakers
1. Align the speaker with the main unit as shown in
the figure, interlock the grooves and press
down.
2. Connect the colored speaker cable to the same
colored speaker terminals.
3. When using the unit with the speakers attached,
wind the speaker cables as shown.
Detaching the speakers
Speaker release lever
1.
Unlock the speaker release levers by pulling
them in the direction shown above, and slide up
each speaker.
2. Connect the speaker cables to the speaker ter
minals.
Since a strong magnet is used for the speaker, keep magnetized
commuter passes, tickets or personal credit cards, recorded tapes,
watches, etc. away from the speakers. The magnet in the speakers
may damage them.