Power sources, To operate on ac power, Battery life – Panasonic RX-E300 User Manual

Page 5: To operate on dry cell battery power, Battery installation, Battery removal, Memory back-up batteries

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Power Sources

This system сап be operated either on the househoid AC power or
the dry cell battery power.

To operate on AC power

Connect the included AC mains lead to the AC IN— socket of this
unit and your household mains outlet.

Battery life

When the batteries are weak:

»The display of the front panel will start to flash.

»The unit will automatically turn itself off, then “U01” will be ap­

peared on the display.

In those cases, replace ail batteries with new ones.

AC mains lead and household mains outlet are different according to
the area.

To operate on dry cell battery power

When using the memory back-up batteries (see right), insert them

first.
Please read “Use of batteries" on page 7.

Battery installation

Unplug the AC mains lead from the household mains outlet and the

AC IN— socket of the unit.
Open the compartment for the batteries and insert eight “R20/LR20”
size (UM-1, not included) batteries into the battery compartment.
Make sure that the batteries are installed in the designated numeri­
cal order and that the proper polarities are maintained.

XJ\

Rear panel

A.

ГЭ

“R20/LR20" size
(UM-1)

Outer row

® CZ

j

C

î

3(XJC

l

Inner row

• Batteries installed with incorrect poiarities may leak and damage

this unit.

• Do not mix batteries (old and new) or types (manganese and

alkaline, etc.).

• if the unit is not used for a long period of time or is used only from

an AC power source, remove the batteries to prevent potential
damage from possible battery leakage.

Battery removal

Memory back-up batteries

In the event of a power failure, or if the AC mains lead is discon­
nected from the household mains outlet (during AC operation), or

should the battedes fail, the memory back-up batteries wili preserve
the preset memory and the timer functions of this unit.

Please read “Use of batteries" on page 7.

Battery installation

Insert four “R6/LR6” size (UM-3, not included) batteries into the

battery compartment, making sure that the batteries are installed in
the designated numerical order that the proper polarities are main­
tained.

Battery removal

Press the © side of the battery No. 2.

Battery life

The life of the memory back-up batteries is about one year.

•The life of the memory back-up batteries can be prolonged by

keeping the AC mains lead plugged in the household mains outlet

at all times.

•When disconnecting the AC mains lead, turn the unit off first using

the POWER button.

•The life of the memory back-up batteries is reduced if the AC mains

lead is disconnected from a household mains outlet with the power

still supplied.

•While exchanging the memory back-up batteries, be sure to con­

nect the AC mains lead both to the unit and to the household mains
outlet.

Pull out the © side of battery No. 6.

Advertising