Manual tuning procedure, Direct tuning, Fine tuning procedure – Panasonic NV-HD670 User Manual
Page 13: Blanking of unused programme positions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Manual Tuning Procedure
1 Press MENU,
2 Select TUNER PRESET by pressing
A or T and
ENTER.
3 Select CH by pressing
A or ▼ then select the channel
number you want tuned by pressing ◄ or ►.
4 Confirm that CLEAR is set to OFF.
5 Select SEARCH by pressing
A or T then press
M
or
On Screen Display
Ehtf; MENU
6 If the desired TV station has not been tuned, press ◄
or ► again.
•Press MENU and repeat steps 3-5 for each programme
position you want to tune to a station.
•To exit, press MENU three times.
Direct Tuning
1 Repeat steps 1-4 in Manual Tuning.
2 Select SEARCH by pressing
A or T .
3 Using the numeric buttons on the remote controller
{Ensure that VCR/TV switch is set to VCR.), enter the
same number as the number of the channel to be tuned.
For the 5A and 9A channels, input the following
numbers: 90 for CH-5A, 91 for CH-9A.
• For other channels that require tuning, repeat steps 3-4
in Manual Tuning and steps 2-3 above.
•To exit, press MENU twice.
Fine Tuning Procedure
1 Press MENU.
2 Select TUNER PRESET by pressing
A or T and
ENTER.
3 Select CH by pressing
A or ▼ then select the
programme position by pressing ◄ or ►.
4 Select FINE by pressing
A or ▼.
5 Press or ► to obtain the best tuning condition.
On Screen Display
CH2
AFC: ENTER
FINE
ENDIMENU
•To return the tuning to its former state, press ENTER.
6 Press MENU.
Blanking of Unused Programme
Positions
1 Press MENU.
2 Select TUNER PRESET by pressing
A or T and
ENTER.
3 Select CH by pressing
A or T then select the
programme position by pressing ◄ or ►.
4 Select CLEAR by pressing
A or T .
5 Select ON by pressing ◄ or ►.
•Repeat steps 3-5 for other unused programme
positions to skip during the selection of programme
positions.
•To cancel the blanking of a programme position,
select that programme position then select CLEAR
OFF.
6 Press MENU twice.
13