Panasonic NV-HD670 - Manual (Page 25)

To Select the Desired Tape Speed
Press SPEED before recording. Display Symbol
SPEED
О
To Interrupt Recording ^
Press PAUSE/SLOW (PAUSE/STILL) during recording.
Press again to continue recording.
PAUSE/SLOW
To Record One TV Programme while
Viewing Another One
1 Refer to steps 1 -4 of the manual recording operation.
2 Press VCR/TV to select the TV mode.
(NV-HD670EA only)
3 Select the TV programme on your TV that you wish to
view now,
• Ensure that VCR/TV switch is set to TV.
To Display the Approximate Remaining
Tape Time
1 Select TAPE SELECT from the on screen display and
seiect the corresponding video cassette tape length.
See page 20.
ci::>
о
On Screen Display
.OSCki......... ON *OFF
-TAPE SELECT- ’*E«D”"ETS5 £2«
TAPE SPEED <SP LP
BLUE SACK ON *OFP
AUDIO MIX ON «OFF
SELECT: Sa
-/+ :ва
END:MENU
J
El 80; For E30, -60, -90, -120, -150 and -180 tapes.
El95; For E195 tape.
E240: For E240 tape,
E260: For E260 and -300 tapes.
2 Press DISPLAY.
DISPLAY
О
The display changes as follows each time DISPLAY is
pressed.
Clocks Counter-^ Remaining Tape Time-----------------
•The remaining tape time may not be displayed
correctly depending on the tape used.
Notes:
•When a video cassette with a broken off erasure
prevention tab is inserted, the “BSi’ indication will flash to
indicate that recording is not possible even if REC/OTR
is pressed.
•The recording pause mode will be automatically
released after 5 minutes, and the VCR will return to the
stop mode.
The NICAM Broadcast System
(NV-HD670EA only)
NV-HD670EA is equipped with the NICAM sound system.
NICAM is a 2 channel sound broadcast system to provide
either a high quality stereo sound track or 2 independent
MONO sound tracks. Ml and М2.
NICAM programmes are always accompanied by
standard sound broadcasts and you can select the
desired sound with AUDIO OUT during playback.
•The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
•When NICAM programme is being received, the
indicators are lit to inform you of the type of broadcast.
(See page 19.)
•To record the regular sound (ordinary norma) sound) on
the FM audio tracks when a NICAM programme is
received, select MONAURAL ON. (See page 21.)
•To hear stereo performance connect as shown on
page 8 to a TV or Stereo Amplifier with left and right
audio inputs.
Important Note for the NICAM System
When NV-HD670EA is switched on, the tuner will
automatically switch to a NICAM broadcast, if NICAM is
being transmitted.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and М2 formats are not yet
available. Even if the sound track is in MONO, the stereo
indicator will appear.
CO
c:
.o
■G
5
Ф
.O
CO
25