Panasonic NV-HD670 - Manual (Page 7)

14 PAUSE/SLOW
During playback:
•By pressing:
Still picture. “QD” is lit.
• By pressing for 2 seconds or more:
Slow playback. “DO” is lit.
During recording; Interrupts recording.
15 Numeric Buttons
Selects programme positions (1-99) of the VCR.
• Ensure that VCRAV switch is set to VCR.
9: ®
19: ©-©-(i)
Programmes G-Code numbers.
• Ensure that VCR/TV switch is set to VCR.
16 INPUT SELECT
Selects the A1 or A2 external recording source.
17 DISPLAY
Changes the indication on the VCR display or on
screen display as follows.
►Clock->Counter-^ Remaining Tape Time-
¡z
18 INDEX
Used for the index search function.
19 V /\
Selects the required programme position (TV station)
of the VCR.
•This button can also be used for tracking adjustment
and vertical locking adjustment.
• Ensure that VCR/TV switch is set to VCR.
20 ENTER
Confirms the selection, or stores.
•The buttons with the green characters are ones
which are used for the on screen display menu
operations.
21 VCR/TV switch
VCR: Selects the VCR operation mode.
TV:
Selects the TV operation mode.
22 G-CODE
Used for G-Code programming.
TV OPERATION
Set VCR/TV
switch to TV for
using \/ /N and
the numeric
buttons.
23 Numeric Buttons
Selects programme positions (1-99) of the TV.
•Ensure that VCR/TV switch is set to TV.
24 TV
Press to switch the TV from on to standby mode or
vice versa. In standby mode, the TV is still connected
to the mains.
•With some TV models, it may only be possible to
switch the TV to the standby mode using this button,
in this case, use AV, the numeric buttons or v /\
to switch the TV on.
25 AV
Selects TV input.
26 ^
Adjusts the volume of the TV.
27
^ /N
Selects the required programme position (TV station)
of the TV.
• Ensure that VCR/TV switch is set to TV.
Power Source for the Remote Controller
The remote controller is powered by 2 “AA”, “UM3" or “R6”
size batteries. The life of the batteries is about one year,
although this depends on the frequency of use.
Precautions for Battery Replacement
•Load the new batteries with their polarity (© and Q)
aligned correctly.
•Do not apply heat to the batteries, or an internal short
circuit may occur.
•If you do not intend to use the remote controller for a
long period of time, remove the batteries and store them
in a cool and dry place.
• Remove spent batteries immediately and dispose of
them.
•Do not use an old and a new battery together, and never
use an alkaline battery with a manganese battery.
Installing the Batteries