Connections, Note, Connection to a stereo amplifier – Panasonic NV-HD670 User Manual
Page 8: Basic connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
This section shows you how to connect the
VCR to an aerial, TV, etc.
When the VCR is turned on after unpacking
and connecting the aerial cable and the mains
lead, Plug in Auto Tuning starts automatically.
(NV-HD670EAonly)
Basic Connections
The following connections are required to record
and play back the video cassette through the TV.
TV (Not supplied)
Aerial Connector
INI
To mains supply
Aerial
(Not supplied)
1
Connection to a TV using the Audio/Video Input Sockets
TV {Not supplied)
Note:
Set RF OFF/TEST SIGNAL to RF OFF when the
VCR is connected to the TV via the Audio/Video
cable.
(NV-HD670A only)
4
To main supply
•Connection to a Stereo Amplifier
Aerial
{Not supplied)