Panasonic TC-21SV10M EN - Manual (Page 15)

f Finé Tuning operation ) ( Prograrntné Number Sl<ip Opefation ^
Under normal reception condition, this function is not used.
However, in areas of poor reception or constant interference,
a slight adjustment on the fine tuning can improve the picture
and sound quality.
How to set the Fine Tuning Operation.
1. Select the desired Programme Number.
2. Press the "PRE." (PRESET) button 6 times.
The on-screen will appear as shown ;
—
PRE, 1
CH 4
SYS SELECT
AUTO TUNE
MANUAL TUNE
SOUND SYS
,-CQi.P0B SY,S,
SKIP
PRESET
CHtNA
6.5MHz
AUTO
OFF
3. Press either the Volume Up "+” or Down " - ” buttons
continuously.
When the above fine tuning operation has been performed,
the " symbol appear on the left of Programme Number.
The AFC function is deactivated.
1. Press the TRE." (PRESET) button 7 times.
The on-screen will appear as shown ;
PRE. 1
CH 4 PRESET
SYS SELECT CHtNA
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SYS
RNETUNE
[1 k E3
6.5MHz
AUTO
OFF-
blinking
2. Select a Programme Number you want to skip, by pressing
the Programme Number Up or Down button.
3. Press the Volume Up V' or Down button on the TV set.
The displayed "OFF” condition changes to "ON".
1
CH4 PRESET
SYS SELECT CHINA
AUTO TUNE
MANUAL TUNE
SOUND SYS 6.5MHz
COLOUR SYS AUTO
rUNE
ON -4-
JrltlËTt.
blinking
AFC OFF
symbol 1
CH 4 PRESET
SYS SELECT CHtNA
AUTO TUNE
MANUAL TUNE
SOUND SYS
COUDUn SYS
■.EiaEJlihET-l
SKIP
6.5MHz
AUTO
OFF
4. Press the "PRE." (PRESET) button twice to return the TV set
to the normal operating mode.
4. !f more Programme Number are to be skipped, repeat
step 2 and 3.
5. Press the "PRE." (PRESET) button once to return the TV
set to normal viewing condition.
How to Cancel the Skip Operation.
1. Press the "PRE. (PRESET)” button 7 times.
The on-screen will appear as shown ;
How to Cancel the Fine Tuning Operation.
If you want to reset this Programme Number to the
automatically tuned condition with the AFC activated,
perform the following steps :
1. Press the " PRE." (PRESET) button 3 times.
The on-screen will appear as shown :
PRE.
r
1
CH4 PRESET
SYS SELECT CHINA
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SYS
FINE TUNE
iSKIP i
6.5MHz
AUTO
ON
blinking
\
CH4 PRESET
SYS SELECT CHINA
AUTO TUNE
MANUAL TUNE
SOUND SYS
COLOUR SXS
^ FINE TUNE
1
6.5MHz
AUTO
SKIP OFF
2. Press either the Volume Up V or Downbuttons on
the TV set.
3. Press the " PRE." (PRESET) button 5 times to return the
TV set to the normal operating mode.
2. Select the skipped programme number by pressing the
Programme Number Up or Down button.
3. Press the Volume Up"+" or Down button on the TV set.
The displayed "ON" condition changes to "OFF".
If more Programme Numbers are to be cancelled,
repeat step 2 and 3.
4. After the operation is completed, press the "PRE." (PRESET)
button once to return the TV set to the normal operating mode.
12