Panasonic TC-21SV10M EN - Manual (Page 18)

( VCR : General Operation) ( Main Menu Operation )
7. Still/Advance Button
Press this button during Still mode. Each time you press
this button, the still picture is advanced, frame by frame.
The menus can be displayed on the screen by pressing the
"MENU" button.
After you press the "MENU" button, on-screen display appear
as below:
MENU
When this button is pressed during playback, the mode
turns to slow playback (when you hold slow playback
mode for more than 10 min,, the mode turns to STOP
mode). Press either "PLAY” button to cancel.
8. Displaying the Tape Counter
Make sure that a tape is inserted. The playback time after
insertion of the tape is shown after pressing the CALL button.
Press the button once again to cancel.
MAIN MENU
PIC TURE
FEATURES
CLOCK
PROGRAM ME
GUIDE C H
The PICTURE. FEATURE, CLOCK, PROGRAMME and
GUIDE CH can be selected by using the Position Up or
Down buttons.
These items can be adjusted or set-up by using the Position
Left or Right button.
■ STOP
0 : 10.00
J
9. RESETTING the Tape Counter
By pressing this button, the counter reset to 0:00.00.
10. TRACKING Button
pTRACKlNG-|
When the playback picture is not clear, press the
TRACKING buttons 'V and to adjust for best picture.
For vertical locking adjustment. Use the "+" and
buttons to minimize any vertical jitter during still-picture
playback.
Note ;
When this button is pressed, the mode turns to manual
tracking mode.
Mode returns to automatic tracking mode when the tape
is inserted.
a) Select the PICTURE menu and press the Position Left or
Right button.
The colour control function (COLOUR. NTSC-TINT. BRIGHT,
CONTRAST and SHARPNESS) will be displayed. It can be
adjusted by pressing these buttons.
Press the Position Up and Down button to shift the cursor to
another items of colour control function.
<1
PIC TURE
32 COLOUR
32 NTSC-TIN T
32 BRIGHT
47 CONTRAST
32 SHARPNESS
b) Select the FEATURES menu and press the Position Left and
Right button.
The on-screen will display the OFF TIMER, BLUE BACK and
REPEAT mode.
Explanations as explained on page 16
c) Select the CLOCK menu and press the Position Left and
Right button.
Explanations are on page 9.
d) Select the PROGRAMME menu and press the Position Left
and Right button.
Explanations are on page 18.
e) Select the GUIDE CH menu and press the Position Left and
Right button.
Explanations are on page 20. 21 and 22.
15