Panasonic TC-21SV10M EN - Manual (Page 23)

GUIDE CHANNEL (TC-21SV10M, TC-21SV10H, TC-14SV10M and TO-14SV10H only)
G-Code Programming Case 1
When the G-Code are printed on newspaper or magazines.
The Guide channel is a code dedicated to a broadcast station, and enables you to correctly receive broadcast
stations using G-Code scheduling.
The Guide channel may differ from the actual TV channel, so care should be taken.
( VCR Operation)
1,8
MENU <] -
(i W
COUNTfiR
TIMER
■ REC
О
L- CALL RESET-
Ш IE IS—□
j^ACKlNG^ . p INDEX -[
О Ы Ш—-Й
G4;ooe ■ STORE ■
a—
1. Press the "MENU" button.
MENU
2 , 3 , 6
( MAIN MENU
\
i£fCBJ0El
FEATURES
CLOCK
PROGRAM ME
GUIDE C H
/
2. Select the GUIDE CH Menu by using the Position Up or
Down button.
4. Push the "Direct Programme Number Selection” button and
set the G-Code which is printed on newspaper or magazine.
GUIDE C H
I GUID E CH l POS
1 2 3 4 S 6 7 8 9
Note :
If you have entered the wrong number, press the "N" button.
5. Press the "STORE” button.
GUIDE C H
GUIDE C H I. PQS 1
194
1 2 3 4 5 5 7 8 9
The Guide channel corresponding to the G-Code will
be displayed.
6. Set to the same Programme Number Position as you have
set for the Guide channel using the Position Up or Down
button.
/
GUIDE C H
GUIDE C H l ,P OS
I
194 Xiir
1 2 3 4 5 6 7 8 9
Setting range: 0-59 -> AV
MAIN MENU
PIC TURE
FEATURES
CLOCK
,,ES.0GBAMME
1 ешоЁ.ш
3. Press the Position Left or Right button.
GUIDE C H
I GUIPE^' h J POS
7. Repeat Steps 4 to 6 for each Guide channel.
8. After you finish setting all the Guide channels, press the
"Menu” button twice.
MENU 1
\________
Note;
1. To receive satellite stations, the satellite receiver must
be connected to the AV Input Terminals and programme
position must be set depending on the type of the
connection made, set to programme number AV.
2. When the satetlite receiver is connected by means of the
RF coaxial cable, set to a Programme Number 0.
20