Tv mode only), Sourid system selection ), Colour system selection ) – Panasonic TC-21SV10M EN User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
( SoUrid System Selection )
(TV mode only)
( Colour System Selection )
1. Press the ”PRE.” (PRESET) button 4 times. Setting
the Preset Menu to "SOUND SYS".
PRE.
1, Press the "PRE." (PRESET) button 5 times. Setting the
Preset Menu to "COLOUR SYS".
(In AV mode, press the "PRE." (PRESET) button once).
PRE.
2. Press the Volume Up V or Down button on the TV set
until the optimum sound is obtained.The selected sound
system is automatically memorized.
3. Press the "PRE." (PRESET) button 4 times to return
to normal operating mode.
Note;
Each model or each country has different Sound System
depending on type of broadcasting transmission.
MODEL
SOUND SYSTEM
TC-14SV10H
TC-21SV10H
6.0 MHz 6.5 MHz
TC-14SV10S
TC-21SV10S
5.5 MHz 6.5 MHz
TC-14SV10M
j TC-21SV10M
5.5 MHz
2. Press the Volume U p o r Downbutton until the
optimum image is produced.
(each model has different Colour System)
The colour system will change as shown below;
p AUTO-»* PAL-*" NTSC 3.58-^ NTSC 4.43 -j
3. Press the "PRE." (PRESET) button 3 times to return to
normal operating mode.
The selected Colour System is automatically memorized,
(in AV mode, press the "PRE." button once)
Note;
Each model or each country has different Sound System
depending on type of broadcasting transmission.
MODEL
: COLOUR SYSTEM ;
TC-14SV10H
TC-21SV10H
TV
AUTO—►PAL—► NTSC4.43
i . I
AUTO—►PAL—► NTSC4.43
t-------------- NTSC 3.58 ^--------------1
TC-14SV10M
TC-21SV10M
TV
AUTO—►PAL—► NTSC4.43
f _ I
AV
AUTO—►PAL—► NTSC4.43
t-------------- NTSC 3.58 --------------- 1
TC-14SV10S
TC-21SV10S
TV
AUTO—► PAL —► SECAM
t-------------- NTSC 4.43 --------------- 1
AV
AUTO —► PAL—► SECAM
t NTSC 3.58-^ NTSC 4.43*-l
13