360 Systems Instant Replay DR-554 - Manual (Page 25)

Instant Replay Owner's Manual Page 25
Cut, the playing Cut will stop and the next Cut will play immediately. The sequence will continue in
this manner until the end of the Playlist, or until the P
LAYLIST button is turned off.
If L OOP is on, individual Cuts will loop until L OOP is turned off, S TOP is pressed, or P LAY is pressed.
If Play is pressed, the next Cut in the Playlist will begin looping.
Follow-On Playlist Characteristics
If the Playlist Type is FOLLOW-ON, the P LAY button will play the first Cut in the Playlist. When the
first Cut ends, the next Cut in the Playlist will automatically begin playing immediately. The Hot-
Key corresponding to the current Cut will light when playing, and the next-to-follow Hot-Key will
flash indicating that it is queued to play.
A Follow-On Playlist will continue to play to its end unless you press S TOP . Pressing P LAY will then
cause the next Cut in sequence to begin. If you exit the Playlist mode while a Follow-On Playlist is
executing, the current Cut will play to completion and then the Playlist will stop. Pressing PLAY
while a Follow-On Playlist is executing has no effect.
If L OOP is on, the entire sequence of Cuts in the Playlist will repeat. Pressing S TOP ends playback
of the current cut immediately. Turning off P LAYLIST will cause playback to end after the currently
playing Cut finishes. Turning off L OOP will cause playback to end at the end of the Playlist.
Selecting and Playing a List
To select and play a Playlist:
•
If necessary, select the Bank that contains the desired Playlist. (The Playlist number is
always the same as the Bank.)
•
Push the P LAYLIST button.
•
Push the P LAY button.
Playlists always start at their first Step when turned on. A Playlist can be enabled "on the fly" during
playback of another Cut. The next time P
LAY is pressed, the first Step in the Playlist will be heard. If
it is a Follow-On list, the entire list will play in succession.
P LAYLIST can be turned off during playback, causing playback to stop at the end of the currently
playing Cut. Also, the Hot-Keys immediately become active and can interrupt the playing Cut.
For convenience, the H OT -K EY corresponding to a Playlist Step will light when playing; and the next-
to-follow H OT -K EY will flash. The display always shows the Cut currently playing on the bottom
line, and the Cut in the currently selected Step on the top line; see “Changing the Playlist Playback
Order,” below.
Upon completion of a Playlist (the last Cut in the list Plays to completion or Stop is pressed during its
playback), the Playlist mode is automatically turned off.
Editing the Playlist
Note that if PLAYLIST PROTECTION is ON, the Playlist cannot be edited. See “Playlist Menu” on
page 23.
To remove a Cut from the Playlist:
•
Use the S CROLL A RROWS to find the Cut you want to delete.
•
Press C ANCEL to remove it from the list.
•
Press Enter to confirm the operation.
To insert a new Cut into the Playlist:
•
S CROLL to the position you desire within the list.