360 Systems Instant Replay DR-554 - Manual (Page 35)

Instant Replay Owner's Manual Page 35
To Copy a Bank:
•
Select the Bank to be copied
•
Press Menu and select COPY BANK using the Scroll Arrow keys.
•
Press Enter. The display will show:
REPL DUPL INDEX?
ENTER=YES, CANCEL=NO
•
Press Enter or Cancel as desired. The display will show:
REPL DUPL NAMES?
ENTER=YES, CANCEL=NO
•
Press Enter or Cancel as desired
•
The display will show:
SELECT DEST BANK
PRESS ENTER/CANCEL
•
The number of the currently selected Bank will flash as a reminder in case you want to
copy to the same Bank number on the destination drive.
•
Press Cancel to terminate the copy operation and return to the menu
OR
•
Press Enter to copy to the selected Bank
OR
•
Press a Hot-Key from 1 to 10 to select a Bank to copy to, then press Enter to start the
operation.
•
The display will show the file being copied, and the total number of files to copy:
COPYING 1 OF XX
001 CUT NAME 01%
•
If you chose either of the REPLACE options and the operation results in a cut being
replaced, the display will show REPLACE 1 OF XX during that portion of the copy
operation. When the operation is complete, the display will show:
FILES COPIED: XX
FILES NOT COPIED: 0
•
Press Enter or Cancel to return to the menu.
•
Press Menu to exit.
•
Files Not Copied should be zero unless the destination disk became full, or there was a
disk error on the source or destination drive.
Copy Drive
Copy Drive copies all the cuts from one drive to the other. Banks and Playlists are not copied. This
function is mainly used to get the Cuts from a Zip disk onto the Internal Drive. Copy Drive offers the
same options for replacing duplicates as Copy Bank.
•
Select the Drive to be copied.
•
If desired, Select the first Cut to be copied. (This allows starting from a particular cut
when backing up to several Zip disks.)
•
Press Menu and select COPY DRIVE using the Scroll Arrow keys.
•
Press Enter. The display will show:
REPL DUPL INDEX?
ENTER=YES, CANCEL=NO