Acoustica Spin it Again User Manual
Page 20
hum. By default, the software will automatically split up the recording into multiple tracks
based on a silence location algorithm and/or typed or looked up track times. (In some cases, it
doesn't accurately split up the tracks and you'll need to edit the tracks manually. See track
splitting troubleshooting.)
There are two views of the recording. The top view shows all the tracks, the track numbers
and is a quick way of getting around the entire recording. The bottom view allows you to zoom
in and out, and adjust the start and end of each track. (In the screen shot above, track three is
shown in
green
.)
You can adjust a track's start and end by dragging it or clicking the track adjustment buttons.
The figure below shows some unwanted record noise highlighted by a red square.
Adjust the start marker by dragging it to the right to get rid of the record noise.
Track one now starts at the beginning of the music.
You can also set the name and volume for each track as shown in the figure below.
Page 20 of 39
Spin It Again
7/10/2007
file://C:\acoustica\vinylman\help\flat\spinitagain.htm