Acoustica Spin it Again - Manual (Page 38)

We now have two effects loaded. To adjust the parameters for either effect, click on the effect
title on the left hand side and then adjust the parameters to the right.
The list of effects that you choose is also called an "effect chain" because the audio will pass
through each effect starting at the top effect going to the bottom effect. In the above case, the
raw recording will first go through "Acoustica Advanced Vinyl Cleaner" and then "Acoustica
Noise Reduction".
When you are done, click the [x] on the top right hand side of the window. It will ask you if you
want to save it and give it a name. You can always edit it again later.
You can reorder the effects by drag and drop or by selecting it and then clicking "Up" or
"Down".
If you do not want an effect, select it and click "Delete"
Useful Acoustica Effects
z
Click And Pop Reduction - Reduces and muffles clicks and pops.
z
Noise Reduction - Cancels out noise such as tape hum and hiss. You'll need to have a
noise print set to hear this. For more help see Reduce Tape Noise Hiss or Hum
z
EQ - A 10 band equalizer to adjust different frequency ranges.
z
Compressor - Great for bringing a quiet recording up in volume. It can work wonders for
older recordings.
z
Reverb - Simulate a great concert hall
DirectX Effects
If you have any third party DirectX effects installed, you will be able to load them as well.
(Please note that you must have "Load DirectX Effects" checked in the Miscellaneous
Settings)
VST Effects
If you have any third party VST effects installed, you will be able to load them as well. (Please
note that you must have "Load VST Effects" checked in the Miscellaneous Settings)
LP
An LP stands for 'long play' and is a term for a record that is played on a record player.
The standard speeds are 33 rpm, 45 rpm and 78 rpm.
Page 38 of 39 Spin It Again
7/10/2007 file://C:\acoustica\vinylman\help\flat\spinitagain.htm