Acoustica Spin it Again - Manual (Page 29)

use.
Delete Recorded Files After Use
To help cut down on used hard drive space, the software will automatically delete recorded
files when you quit the program or start another recording.
Show Folder After Rendering Files
The software will open the folder where the new audio files were created.
Ask Before Allowing Level Wizard To Select The Best Input
If checked, the software will ask to automatically change the recording input to "Line In" when
running the Level Wizard...
Allow Level Wizard To Select The Best Input
If checked, the software will automatically set the recording input to "Line In" when running the
Level Wizard...
Advanced CD Burner Options
----------------------------------------------
Use X Minute Blank CDs
Choose the length of audio CDs that you are going to burn. The most common length is 80
minutes. (The default is 79 minutes which helps to accommodate for a few burners which can
only burn 79 minutes and 29 seconds)
Use IMAPI For Burning (XP Only)
For Windows XP only! You can have Spin It Again use Windows XP's built in CD burning
system. It will take longer and require more disk space. It will also burn your CDs in Track At
Once (TAO) mode which may not be as compatible with all CD players. If you are having
problems burning, you might try this option. (Please note that you will need to restart the
software before this change will be activated.)
Use Acoustica ASPI Layer
The tells the software to use the Acoustica ASPI layer . If this is unchecked, Spin It Again will
attempt to use an Adaptec / Roxio ASPI layer. Try toggling this option, if you are having
problems burning CDs. (Please note that you will need to restart the software before this
change will be activated.)
Goldenhawk Drive Override
This button allows you to configure your CD burners that our software fails to recognize. You
can set up the software to use a 'generic' CD burning driver or choose from a list of similar CD
burners. This is not guaranteed to work, but is there as an option. If, after trying this option
that the software crashes when it gets to the CD burner page, you should delete a file called
"DEVICES.DEF" located in your Spin It Again folder. (Please note that you will need to restart
the software before this change will be activated.)
Cleaning & Effects Settings
Page 29 of 39 Spin It Again
7/10/2007 file://C:\acoustica\vinylman\help\flat\spinitagain.htm