ALFA NETWORK TUBE-U(N) - Manual (Page 16)

January 13, 2009 / Version: 2.0 12
3. In section, fill in information for this profile:
Items Information
Profile Name Choose a name for this profile, or use default name defined by system.
SSID
Fill in the intended SSID name or use the drop list to select from
available APs.
Network Type
There are two types, infrastructure and 802.11 Ad-hoc modes. Under
Ad-hoc mode, you could also choose the preamble type; the available
preamble type includes auto and long. In addition to that, the channel
field will be available for setup in Ad-hoc mode.
Tx Power
Transmit power, the amount of power used by a radio transceiver to
send the signal out.
Preamble
Two selections: Auto, and Long Preamble. This can only be set up in
Ad –hoc mode.
Channel Channel in use for Ad-Hoc mode.
Power Save Mode Choose from CAM (Constantly Awake Mode) or PSM (Power Saving
Mode).
RTS Threshold
For adjusting the RTS threshold number by sliding the bar or key in the
value directly. The default value is 2347.
Fragment Threshold Adjust the Fragment threshold number by sliding the bar or key in the
value directly. The default value is 2346.