ALFA NETWORK TUBE-U(N) - Manual (Page 30)

January 13, 2009 / Version: 2.0 26
A. WPS Information on AP: On Network AP list, double click on the AP then you can see the
information appears below.
Items Information
Authentication Type There are three authentication modes supported by this utility. They are
open, Shared, WPA-PSK and WPA system.
Encryption Type For open and shared authentication mode, the selection of encryption
type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK
authentication mode, the encryption type supports both TKIP and AES.
Config Methods Correspond to the methods the AP supports as an Enrollee for adding
external Registrars. (a bitwise OR of values)
Device Password ID Indicates the method or identifies the specific password that the selected
Registrar intends to use. APs in PBC mode must indicate 0x0004 within
two-minute Walk Time.
Selected Registrar Indicates if the user has recently activated a Registrar to add an Enrollee.
The values are "TRUE" and "FALSE".
State The current configuration state on AP. The values are "Unconfigured"
and "Configured".
Version WPS specified version.
AP Setup Locked Indicates if the AP has entered a setup locked state.
UUID-E The universally unique identifier (UUID) element generated by the
Enrollee. This is a 16 byte value.
RF Bands Indicates all the RF bands available on the AP. A dual-band AP must
provide
it. The values are "2.4GHz/5.8GHz" and "5GHz".