ALFA NETWORK TUBE-U(N) - Manual (Page 24)

January 13, 2009 / Version: 2.0 20
Advanced
This page provides advanced configurations to this adapter. Please refer to the following chart for
definitions of each item.
Items Information
Wireless mode Select wireless mode. 2.4G/5.8G is supported.
Enable TX Burst Select to enable connecting to a TX Burst supported device.
Enable TCP Window Size Mark the checkbox to enable TCP window size, which help
enhance throughput.
Fast Roaming at __ dBm Mark the checkbox to enable fast roaming. Specify the
transmit power for fast roaming.
Show Authentication Status
Dialog
Mark the checkbox to show “Authentication Status Dialog”
while connecting to an AP with authentication.
Authentication Status Dialog displays the process about
802.1 x authentications.
Select Your Country Region
Code Eight countries to choose. Channel list:
1 ~ 11 channels (North America)
1 ~ 13 channels (General Europe)
1 ~ 14 channels (Japan)
IEEE802.11a
4 Channels (Japan)
19 Channels (Europe)
13 Channels (USA)
Enable CCX (Cisco Compatible
extensions) Select to enable CCX. This function can only be applied
when connecting to a Cisco compatible device.
Turn on CCKM Mark to enable CCKM.
Enable Radio Measurements Mark to enable channel measurement every 0~2000
milliseconds.
Non-Serving Channel
Measurements limit Mark to revise the channel measurement.
Note: For Vista user, click on the CCX button to do more configuration. Please refer to CCX for
more information.