ALFA NETWORK TUBE-U(N) - Manual (Page 39)

January 13, 2009 / Version: 2.0 35
CCX
This page is available for Vista user only. It provides CCX configurations to this adapter. Please
refer to the following chart for definitions of each item.
Items Information
Enable CCX (Cisco Compatible
extensions)
Select to enable CCX. This function can only be applied
when connecting to a Cisco compatible device.
Turn on CCKM Mark to enable CCKM.
Enable Radio Measurements Mark to enable channel measurement every 0~2000
milliseconds.
Non-Serving Channel
Measurements limit
Mark to revise the channel measurement.
Network EAP Enable the NetwrokEAP authentication algorithm.
Enable RF Roaming Enable RF roaming function
Enable CAC (Tolerance) Enable the call admission control
CAC There are four selections: ADDTS (Directly send TS), DELTS,
and RESET. Select an item from the drop down list and then
click on the button.
Diagnosis Select a profile which the user wants to diagnose, and then
click on the Diagnose button to perform the
test.
Radio On/Off
Click on the button to enable/disable wireless connection status.
Connected:
Disconnected: