ALFA NETWORK AIP-W411 - Manual (Page 23)

AIP-W411 150M Wireless 11N Router
- 17 -
Figure 4-2 Router Status
4.3 Quick Setup
Please refer to Section 3.2: "Quick Installation Guide" .
4.4 WPS
This section will guide you to add a new wireless device to an existing network quickly by WPS
(Wifi Protect Setup) function.
a) Choose menu “WPS”, you will see the next screen (shown in Figure 4-3 ).
Figure 4-3 WPS
 WPS Status - Enable or disable the WPS function here.
 Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label or User Guide.
 Restore PIN - Restore the PIN of the Router to its default.
 Gen New PIN - Click this button, and then you can get a new random value for the Router's
PIN. You can ensure the network security by generating a new PIN.
 Add device - You can add a new device to the existing network manually by clicking this
button.
b) To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.