Remote management – ALFA NETWORK AIP-W411 User Manual

Page 62

Advertising
background image

AIP-W411 150M Wireless 11N Router

- 56 -

Figure 4-41 Local Management

By default, the radio button

All the PCs on the LAN are allowed to access the Router's

Web-Based Utility

” is checked. If you want to allow PCs with specific MAC Addresses to access

the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio

button

Only the PCs listed can browse the built-in web pages to perform Administrator

tasks

”, and then enter each MAC Address in a separate field. The format for the MAC Address is

XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with MAC address listed can use

the password to browse the built-in web pages to perform Administrator tasks while all the others

will be blocked.

After click the Add button, your PC's MAC Address will be placed in the list above.

Click the Save button to save your settings.

Note:

If your PC is blocked but you want to access the Router again, press and hold the WPS button for

more than 5 seconds to reset the Router to factory defaults.

4.9.4 Remote Management

Choose menu

Security Remote Management”, you can configure the Remote Management

function in the screen as shown in Figure 4-42. This feature allows you to manage your Router

from a remote location via the Internet.

Advertising