Wireless advanced – ALFA NETWORK AIP-W411 User Manual
Page 47
AIP-W411 150M Wireless 11N Router
- 41 -
4.6.4 Wireless Advanced
Choose menu
“Wireless → Wireless Advanced”, you can configure the advanced settings of
your wireless network.
Figure 4-24 Wireless Advanced
Transmit Power - Here you can specify the transmit power of Router. You can select High,
Middle or Low which you would like. High is the default setting and is recommended.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the Router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the Router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
2346.