Factory defaults, Backup & restore – ALFA NETWORK AIP-W411 User Manual

Page 87

Advertising
background image

AIP-W411 150M Wireless 11N Router

- 81 -

2. Type the path and file name of the update file into the File field. Or click the Browse button to

locate the update file.

3. Click the Upgrade button.

Note:

1. New firmware versions are posted at our website and can be downloaded for free. There is no

need to upgrade the firmware unless the new firmware has a new feature you want to use.

However, when experiencing problems caused by the Router rather than the configuration,

you can try to upgrade the firmware.

2. When you upgrade the Router's firmware, you may lose its current configurations, so before

upgrading the firmware please write down some of your customized settings to avoid losing

important settings.

3. Do not turn off the Router or press the Reset button while the firmware is being upgraded,

otherwise, the Router may be damaged.

4. The Router will reboot after the upgrading has been finished.

4.16.4 Factory Defaults

Choose menu

System Tools Factory Defaults”, and you can restore the configurations of

the Router to factory defaults on the following screen.

Figure 4-75 Restore Factory Default

Click the Restore button to reset all configuration settings to their default values.

The default User Name: admin

The default Password: admin

The default IP Address: 192.168.1.1

The default Subnet Mask: 255.255.255.0

Note:

1. Any settings you have saved will be lost when the default settings are restored.
2. Press and hold the WPS/Reset button for more than 5 seconds, you can reset the router, too.

4.16.5 Backup & Restore

Choose menu

System Tools Backup & Restore”, you can save the current configuration of

the Router as a backup file and restore the configuration via a backup file as shown in Figure 4-76.

Advertising