Analogue Solutions Leipzig-S / SK - Manual (Page 10)

Leipzig-S/SK User Manual
10 Vco - Voltage control oscillators | Analogue Solutions
VCO1
MASTER TUNE
This tune control affects both VCOs.
Note; there are lots of ways this synth can play out of tune. Obvioulsy Master Tune and
Detune must be set correctly. But also the MODULATION AMOUNT controls will affect
tuning, the VCO2 MIDI PITCH switch, and also the positions of the sequencer’s VCO1/2
DESTINATION amount controls.
In normal use, turn the sequencer DESTINATION amount controls to zero.
GLIDE
This is a portamento function. Each note will
glide to the next new note, slowly rising or failing in pitch to the new note. The Glide
knob changes the rate (time) it takes to reach the new note.
MANUAL PULSE WIDTH
This changes the pulse width (duty cycle) of the square wave. Basically turn it and hear
the effect it has on the sound of the square wave!