Analogue Solutions Leipzig-S / SK - Manual (Page 12)

Leipzig-S/SK User Manual
12 Vco - Voltage control oscillators | Analogue Solutions
Oscillator sync is where the VCO’s waveform can be reset by another signal. Don’t
worry about the technicalities. Just use the feature and enjoy the sound!
VCO2 can be sync’ed to VCO1 Square wave, LFO Square wave, External Signal 1, or it
can be turned off.
The best effect can be heard when set to VCO1. For an extreme sound modulate the
pitch of VCO2. You may need to play around with the pitches of VCO1 and VCO2 to find
a setting that works best.
PULSE WIDTH MODULATON
This allows modulation of the Pulse Width of the square wave. It can be modulated by
the LFO Triangle wave when turned left, or by Envelope1 when turned right. Centre
position is off (no modulation).
MIDI PITCH
This switch disconnects the Pitch control of VCO2 from MIDI, so it will no longer
respond to MIDI note commands.
It becomes a ‘free running oscillator’ and will not respond to MIDI. Ideal for modulation.