Analogue Solutions Leipzig-S / SK - Manual (Page 8)

Leipzig-S/SK User Manual
8 Using This Unit Safely | Analogue Solutions
M A K I N G C O N N E C T I O N S
FRONT PANEL
REAR PANEL
Turn the input level down on your mixer.
Connect AUDIO OUT to your mixer using a standard ¼” (6.35mm) mono jack cable.
Connect the mains adaptor to the rear.
Rotate the SEQ SYNC rotary switch in the lower left corner to LFO to start the
sequencer.
Slowly increase the level on your mixer to a suitable level.
Note; you will have to adjust other controls on Leipzig to get a sound, like VOLUME,
VCO Levels, Filter CUTOFF. Many settings will produce no sound!
If you wish to play the synth with a MIDI sequencer or MIDI keyboard connect the
controller’s MIDI OUT to Leipzig’s MIDI IN.