Analogue Solutions Leipzig-S / SK - Manual (Page 14)

Leipzig-S/SK User Manual
14 MIXER | Analogue Solutions
EXT2 / NOISE / SEQUENCER
Left; changes the level of the signal coming into the EXT2.
Right; changes the level of either the White Noise generator or the Sequencer,
depending on the position of the toggle switch.
If the toggle switch is set to SEQ (sequencer) in some cases this can kill the normal
audio from the VCOs. This is normal! Set it to Noise, or put to the centre if the
Sequencer signal is not to be used as an audio signal.
Clock the sequencer at audio frequencies then the sequencer output becomes an audio
frequency. If can be heard when the toggle switch is set to SEQ and the control turned
clockwise.
SUB-OSCILLATOR
Left; changes the level of VCO1 Sub, which is one octave down from VCO1.
RIght; changes the level of VCO2 Sub, which is two octaves down from VCO2.
Adding sub-osc to the normal VCO sounds really beefs up the sound.
VCO1