Analogue Solutions Telemark /-K - Manual (Page 12)

A
analogue Solution – Telemark – 2014 12 | P a g e
Envelope Generators
EG1 ASR
EG1 is an ASR (attack / sustain / release) envelope
generator. Use it to modulate various parameters
of the synthesiser. EG1 is generally assigned for
use with modulating VCO1 and the filter cut-off.
 
ATTACK
Controls the Attack time. This is the rate at which
the envelope signal will take to reach full level
when the MIDI note/key pressed.
 
DECAY
Controls the Decay / Release time - the time it
take the envelope signal to return to zero when
the key is released.
 
SUSTAIN
Controls the level the envelope will hold at when
a key is pressed and the attack cycle has
completed.
EG1 ASR
EG2 is just the same as EG1. EG2 is generally
assigned for use with modulating VCO2 and the
VCA.
 
ATTACK
Controls the Attack time. This is the rate at which
the envelope signal will take to reach full level
when the MIDI note/key pressed.
 
DECAY
Controls the Decay / Release time - the time it
take the envelope signal to return to zero when
the key is released.
 
SUSTAIN
Controls the level the envelope will hold at when
a key is pressed and the attack cycle has
completed.
     