Analogue Solutions Telemark /-K - Manual (Page 23)

A
analogue Solution – Telemark – 2014 23 | P a g e
Addendum
2 Voice Mode / Poly Chain
From approx August 2013;
Telemark and Leipzig-S synths have modified software to add poly-chain to accommodate one other synth.
This will allow 2 Telemarks to be played together as a single 2 voice polysynth. (4 voice is possible too on request - if
you are lucky enough to own 4 Telemarks!)
To connect them up:
Set the Slave Telemark to MIDI channel 2
Take your keyboard to the MIDI In of the Master Telemark
Connect the MIDI Thru from the Master Telemark to the MIDI In of the Slave Telemark
To activate the Poly mode, Press and hold the MIDI/PROG button whilst powering up the Master Telemark. (do the
same to toggle it back to normal mono mode)
There is no need for the Slave Telemark to have the special software or be in any special mode, just as long as it is
set to Channel 2
There is no charge as such for the new software, but there is a charge to cover the cost of a new CPU, admin', post,
and packing.
note; Pitch bend is not passed through. The poly mod is fairly basic (for example there is no note buffer) but it suffices
as a 'free' extra and works well enough!