Analogue Solutions Telemark /-K - Manual (Page 15)

A
analogue Solution – Telemark – 2014 15 | P a g e
MIDI Channel Setting (non- keys versions)
MIDI PROG push button
This button is used to set the MIDI channel and CV2 controller.
Works best if you plug a MIDI keyboard direct to program rather than via a DAW.
To change the MIDI channel and CV2 controller;
Press and hold the PROG button.
Press a MIDI key or move a MIDI controller.
Release the key/controller. Then release the PROG button.
The synth will set its MIDI receive channel to the same channel of the MIDI message that was received.
CV2 will be set to Velocity if you used a MIDI key or to the same controller number of the controller that was moved.